go to text

water treatment filter

About filters

There are different types of filter media, including activated carbon, filtration membranes, ceramics, ion exchange resins, and reverse osmosis membranes.
It is difficult to remove all impurities with one type of filter media, so a combination of multiple filter media is used.
This page introduces common filters.
The filtration capacity depends on the frequency of use and the conditions of the raw water, but it decreases over time, so it will need to be replaced at regular intervals.
We handle various types of filters such as thread-wound, pleated, etc.

What will happen if I don't replace the filter?

What will happen if I don't replace the filter media?
This can cause problems such as reduced filtration ability and impurities not being removed properly, which can clog the filter and impair the flow of water.
In addition, the accumulated impurities and moisture make it easy for bacteria to grow.
In addition, if you continue to use the device while it is clogged, it may cause a decrease in flow rate or even backflow or water leakage.
If water leaks from the device, also check to see if it is past the time to replace the cartridge.
If you continue to use the cartridge without replacing it, it will put a heavy burden on the device, and in the worst case, it will lead to device failure.
The replacement period varies depending on the type and size of the filter media, frequency of use, and water properties, so be sure to understand the operating status of the device.
Be sure to keep an eye on the replacement period, and if possible, replace it earlier than that.
We handle filters from various manufacturers.
small quantity sale,Same-day responseIs possible.

Pretreatment filter (PF)

Filter system tailored to various applications

All filters are cartridge type.

Model
PF series
PF cartridge
Nominal hole diameter (μm)
1,3,5,10,25,50,100
Application features
● Removal of turbidity and iron rust
● We ship after quality control of solute properties (specific resistance, organic substances, etc.) at the initial stage of water flow.
Main material
PP yarn and lamination
Standard flow rate
500
Model
PF series
PF carbon
Nominal hole diameter (μm)
   -
Application features
● Removal of residual chlorine
● Purification of drinking water such as clean water
● Purification of water for food manufacturing and ice making
● Deodorization, decolorization, deoiling
● Treatment of medium water such as bathhouses
Main material
Granular activated carbon
Standard flow rate
500
We deal with various manufacturers
of the Directions & Parking

Click here for a detailed map

Shin-Ei Chemical Industry Co., Ltd.
〒341-0038
2-12-10 Central, Misato City, Saitama Prefecture
TEL.048-953-1616
 FAX: 048-953-1688

Back to TOP